Alvarion BreezeACCESS EZ AU-EZ, Системное руководство

Страница: 142 / 175

Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS EZ AU-EZ 123 System Manual
The default is RTP & RTCP

Add TCP Port Ranges: This option enables adding TCP port ranges to the list
of priority port numbers. The list can include up to 64 ranges. It is possible to
add discrete port numbers and/or ranges. In ranges, a hyphen is used to
separate between start and end port numbers. A comma is used to separate
between entries. For example: 8900,9000-9005,9010,9016-9017.

Delete TCP Port Ranges: This option enables deleting TCP port ranges from
the list of priority port numbers. It is possible to delete discrete port numbers
and/or ranges. In ranges, a hyphen is used to separate between start and end
port numbers. A comma is used to separate between entries.
For example: 8900,9000-9005,9010,9016-9017.

Delete All TCP Port Ranges: This option enables deleting all TCP port ranges
from the list of priority port numbers.

Show TCP Port Ranges: Select this option to view the current TCP RTP/RTCP
Prioritization option and the list of TCP Port Ranges.
4.2.6.6.3.4 IP Range Prioritization
The IP Range Prioritization menu allows prioritization based on the frame’s source
and/or destination IP address. Frames with matching IPs are allocated to the High
Priority queue, while the rest of the frames are allocated to the Low Priority queue.
4.2.6.6.3.4.1 IP Range Prioritization Option
This submenu sets up the type of IP prioritization employed

Disable : The IP prioritization is disabled.

Source IP Prioritization : Frames with matching source IP addresses will be
allocated to the High Priority queue.

Destination IP Prioritization : Frames with matching destination IP
addresses will be allocated to the High Priority queue.

Source or Destination IP Prioritization : Frames with either source or
destination IP addresses within the IP range will be allocated to the High
Priority queue.