manualshive.com logo in svg

Alvarion BreezeACCESS EZ AU-EZ, Системное руководство

Поделиться
Скачать
Alvarion BreezeACCESS EZ AU-EZ Скачать руководство пользователя страница 121

Chapter 4 - Operation and Administration

Menus and Parameters

BreezeACCESS EZ AU-EZ

102

 System Manual

4.2.6.4.2

Ethernet Broadcast/Multicast Limiter

The Ethernet Broadcast/Multicast Limiter parameters enable to limit the number 
of broadcast and/or multicast packets that can be transmitted per second, in 
order to prevent the potential flooding of the wireless medium by certain ARP 
attacks.

When the Ethernet Broadcast/Multicast Limiter is enabled and the specified limit 
is reached, the unit will send a trap. The trap will be sent periodically till the 
number of broadcast/multicast packets will be less than the maximum. The trap 
will inform the user how many packets were discarded in the last period.

The Ethernet Broadcast/Multicast Limiter menu allows viewing and setting the 
following parameters:

4.2.6.4.2.1

Ethernet Broadcast/Multicast Limiter Option

The Ethernet Broadcast/Multicast Limiter Option defines the limiter's 
functionality. The available options are:

Disable: No limiter

Limit only Broadcast Packets

Limit Multicast Packets that are not Broadcasts

Limit All Multicast Packets (including broadcast)

The default selection is Disable.

4.2.6.4.2.2

Ethernet Broadcast/Multicast Limiter Threshold (packets/sec)

The Ethernet Broadcast/Multicast Limiter Threshold defines the maximum 
number of packets per second that will pass the limiter when it is enabled. 

The range is from 0 to 204800 (packets/second).

The default is 50 packets.

4.2.6.4.2.3

Ethernet Broadcast/Multicast Limiter Send Trap Interval (min)

The Ethernet Broadcast/Multicast Limiter Send Trap Interval defines the 
minimum time in minutes between two consecutive transmissions of the trap 
indicating the number of packets that were dropped by the limiter since the 
previous trap (or since the time that the limit has been exceeded).

The range is from 1 to 60 minutes.

The default is 5 minutes.

Содержание BreezeACCESS EZ AU-EZ
















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды