LEVIGATO DRIVES (LG SERIES)
|
LEVIGATO ANTRIEBE (SERIE LG)
|
COMMANDES LEVIGATO (SERIE LG)
26
ADjUSTMENT
10
In three seconds the switch to the waiting mode for the signal from the next
remote control will take place. To exit the programming mode press the
button
or wait for 15 seconds (until automatic exit the setup menu)
The
table 13
describes the settings of deleting the remote control when it is absent but the
information for the remote control number in the drive memory is available.
1
Similarly to
tab.
12 items
1
to
4
, enter the menu ‘
P2
’ and select the setting ‘
f9
’
2
After the appearance of ‘
f9
’
inscription press the button
3
The number of the first recorded remote control will appear on the display.
With the button
or
select the of remote to delete
4
Press the button
. A dot will disappear from the display, this means that
the remote control with the selected number is deleted from the memory
5
In three seconds the next number of the remote control will appear on the
display. To exit the programming mode press the button
or wait for
15 seconds (until automatic exit the setup menu)
Deleting all remote controls
1
Press and hold the button
for about 5 secs to enter the
programming mode
2
After the appearance of ‘
P1
’ inscription press the button
3
After the appearance of ‘
P2
’
inscription press the button
4
With the button
or
select the setting ‘
f0
’
5
After the appearance of ‘
f0
’
inscription press the button
6
After the appearance of ‘
– –
’ inscription press and hold the button
for
5 secs. A dot will appear on the display, this means that all remote controls are
deleted from the memory
7
To exit the programming mode press the button
twice or wait for
15 seconds (until automatic exit the setup menu)
Table 13
Table 14
