Assembly instructions BR 133-3 to 139-3
Status 03/2022
Former instructions lose their validity.
2 / 14
Table of Contents
1. Safety and warning instructions
2
1.1 Checking the scope of delivery
2
1.2 Warning instructions
2
1.3 Safety instructions
3
1.4 Copyright
3
2. Preparatory work / Human resources
4
2.1 Human resources, preparations
4
2.2 Required tools and equipment
4
2.3 Tightening torques of the screws
4
3. Assembly of the kit
5
3.1 Assembling of the longitudinal supports (sub-structure)
5
3.2 Assembling connection of floor and front wall
5
3.3 Assembling of the side walls
7
3.4 Placement and fastening of the roof
8
3.5 Connection of the attached electrics
8
3.6 Assembly of the frame, doors, top gate or sliding door
9
3.7 Placement of the rear roof corners and sealing the kit
10
3.8 Optional additional equipping
10
3.9 Completion work
11
4. Maintenance
13
5. Service, Spare parts
13
6. Waste disposal of used boxes or component parts
13
7. Scope of delivery
14
This manual explains the assembly of kits 133-3 to 139-3. In order to
generate a fault-free structure, absolutely adhere to the work instructions
described here, particularly the following warning notes, the guarantee
otherwise expires. Coloured representations serve for illustration only.
Get in touch with us immediately in case of uncertainties.
1.1Checking the scope of delivery
•
Check the shipment against the enclosed packing list for com-
pleteness.
Notify any damage incurred during transit immediately
to the delivering forwarding agent. Please understand that we must
reserve the right to make changes to the delivery in form, equipment
and technology. Please find the general scope of delivery on page 14.
1.2Warning instructions
AluTeam does not normally know how the kit is going to be used.
As the
vehicle constructor, you must co-ordinate the order and processing
of the kit to the needs of your customer, as well as to the installa-
tion guidelines of the vehicle manufacturer.
This also applies to the
related materials and surface conditions. Damage caused by transported
goods such as aggressive chemicals, do not represent a reason for
complaint.
•
Store the kit dry and clean (not outside).
•
To ensure that no (splashed) water penetrates into the structure,
the sealing cords in the panels must not show any signs of damage.
1. Safety and warning instructions
Please read these instructions completely before commencing the installation!
