Aluratek CDW530AM, Руководство пользователя

Страница: 58 / 63

4.
Troubleshooting
This section provides an overview of common issues, and possible solutions for the
installation and operation of the WiFi Combo Broadband Router.
1. Unable to access the Configuration Menu when I use my computer to configure the
router. Why?
Note:
It is recommended that you use an Ethernet connection to configure the
Ensure that the
Ethernet LED
on the WiFi Combo Broadband Router is
ON
.
If the
LED
is NOT
ON
, check to see if the cable for the Ethernet connection is securely
inserted.
Note:
Ensure that the
IP Address
is in the same range and subnet as the WiFi
Combo Broadband Router. The IP Address of the WiFi Combo Broadband Router is
192.168.123.254. All the computers on the network must have a unique IP Address
within the same range (e.g., 192.168.123.x). Any computers that have identical IP
Addresses will not be visible on the network. All computers must also have the same
subnet mask (e.g., 255.255.255.0).
Do a
Ping test
to make sure that the WiFi Combo Broadband Router is responding.
Go to
Start > Run
.
1:Type
cmd
.
2:Press
Enter.
3:Type “
ping 192.168.123.254”.
A successful ping shows four replies.
Note:
If you have changed the
default
IP Address, ensure you ping the correct IP
Address assigned to the WiFi Combo Broadband Router.
Ensure that your Ethernet Adapter is working properly, and that all network drivers are
installed properly.
Note:
Network adapter names will vary depending on your specific adapter. The
installation steps listed below are applicable for all network adapters.
1. Go to
Start > My Computer > Properties
.
2.
Select
the
Hardware Tab
.
3. Click
Device Manager
.
4. Double-click on “ Network Adapters” .
5. Right-click on
Wireless Cardbus Adapter
, or
your specific network adapter
.
6. Select
Properties
to ensure that all drivers are installed properly.
7. Look under Device Status to see if the device is working properly.
8. Click “
OK”
.
2
. Why my wireless client can NOT access the Internet?
Note:
Establish WiFi Connection. As long as you select either
WEP
or
WPA-PSK
encryption, ensure encryption settings match your WiFi settings. Please refer to your
WiFi adapter documentation for additional information.
Ensure that the wireless client is associated and joined with the correct Access Point.
To check this connection, follow the steps below:
1.
Right-click
on the
Local Area Connection icon
in the taskbar.
2. Select View Available Wireless Networks in Wireless Configure . The Connect to