A
Adjusting the angle of the footplate
• The foot plates angle can be adjusted.
• Untighten the screw (B) and adjust the
foot plate to the required angle. fix the
screw properly.
5 mm Allen key
Locking and releasing the foot plates
• The foot plates come with a locking
mechanism which makes the plates
stronger
• To lock the foot plates pull the plastic
lock on the right foot plate and place the
lock over the bolt on the left foot plate.
• To release the foot plate pull the plastic
lock and lift the right foot plate up.
for outdoor use, there should be a
clearance of 40-50 mm between the
foot plate and the ground.
While making the adjustment there
must be no load on the foot plates.
removing the leg support:
• Pull the plastic lock on the foot plate
rearwards, so that the pin is released,
and the foot plate can be folded up.
• Raise the leg support a few degrees.
• Release the leg support by pulling it
slightly straight up.
• Swing the leg support outwards.
• Lift and remove the leg support.
Never stand on the foot plates!
Never lift the wheelchair by the
leg supports.
Adjusting the calf support
the calf support is height and depth
adjustable. to adjust height unfix the nut
on the outside of the calf support bracket,
find the required height and fix the nut
again (ill. a).
20
my-netti.com
Model:
NettI 4U CE PLUS and CES PLUS
Language:
English
Version:
2017-06
