background image

13.4

 

NETTI CUSToMIzED/

       INDIVIDUAL ADAPTATIoNS

netti customized / individual adaptations 
are defined as all adjustments that are 
not included in this manual. individual 
adaptations made by alu rehab are labelled 
with a unique nec number for identification.

Wheelchairs that are especially adjusted/
adapted for the customer cannot keep the 
ce mark given by alu rehab a.s norway. if 
the adjustments are performed by other than 
alu rehab approved dealers, the warranty 
given by alu rehab a.s norway will not be 
valid. 

if there are any uncertainty about special 
fitting and adaptations, please contact alu 
rehab a.s.

If you have different needs than what 

        our standard wheelchair program can 
        cover, please take contact with 
        customer service for eventually special 
        adjustments or individual solutions.

13.5 CoMbINATIoNS WITH 
       oTHEr ProDUCTS

combinations of netti and other products 
not manufactured by alu rehab a.s:

generally in these cases, the ce mark of all 
the products involved will not be valid.
However, alu rehab a.s has made 
agreements with some manufacturers about 
some combinations. By these combinations 
the ce mark and the guaratee are valid.

for further information, please 

        contact your dealer or Alu rehab A.S 
        Norway directly.

ProDUCT rESPoNSIbILITy

netti 4u ce Plus with different 
configurations of netti equipment has been 
tested /risk evaluated by alu rehab. 
any alterations or substitutions must not 
be made to the wheelchair securement 
points or to structural and frame parts 
without consulting the wheelchair    
manufacturer alu rehab.
substitutions or alterations of components 
from third part suppliers to netti 4u ce 
Plus requires the risk evaluation and 
acceptance of the product responsibility 
and safety for use of the wheelchair from 
the manufacturer that is performing the 
substitution or alteration.

13.5 SErVICE AND rEPAIr 

information about service and repair 
services in you area, please contact your 
local dealer. 

A unique identification number /

       serial number is to be found on the 
       bottom frame on left side of the chair.

A spare part catalogue for the 

       wheelchair can be obtained through 
       your local dealer or downloaded at  
       www.My-Netti.com

A refurbisment manual for the 

       wheelchair can be obtained through 
       your local dealer or downloaded at  
       www.My-Netti.com

Information about product safety and  

       eventually recalls are found on our  
       home page www. My-Netti.com

 

my-netti.com

 37

Model: 

NettI 4U CE PLUS and CES PLUS

Language: 

English

 Version: 

2017-06

Содержание Netti 4U comfort CE PLUS









































Отзывы: