1
2
DrUM brAKE
if the wheelchair is mounted with 12” or
16” main wheels, these will be equipped with
drum brakes. 22” and 24” wheels can also
have drum brakes
If the brake doesn’t brake properly:
to adjust the wire on one or both sides,
adjust the foot screw 2-4 rounds out. then
recheck the brakes.
If the wire is too loose:
adjust the foot screw all the way in. tighten
the wire by loosening the wire clamp before
pulling the wire further through it. tighten
the wire clamp, and adjust the foot screw out
again.
1 pc 10 mm open-end spanner.
To ensure the correct functions of
the wire, these must never be taut.
operating and applying the brake
the wheelbase with drum brake is fitted
with hand operated hub brakes to allow
regulation of speed on hills and whilst
travelling along. these are located on the
push handles.
• To apply the brakes, pull the brake levers
(1) evenly and smoothly towards handle
and bring the wheel-base to a stop.
• For locking the brake in parking position,
press the lever (1) against the push handle
and push the lever (2) away from you
wedging the park brake lever. make sure
both parking brakes are locked.
• The brake will be released when you
press the lever (1) against the push
handle again. it is locked with a spring
and this will in this way be released.
Do not leave the user alone in the wheel-
chair without putting the parking-brake
in function.
24
my-netti.com
Model:
NettI 4U CE PLUS and CES PLUS
Language:
English
Version:
2017-06
