background image

2. QuicK 
reference

the content of this page is a summary 
of the whole manual. it gives a brief 
introduction to the use and care of the 
netti 4u ce Plus & ces Plus wheelchair.

The quick reference is not a  

       replacement for the manual, only a  
       reminder/check list.

• Unpack the wheelchair (Chapter 6.1)
• Mount the main wheels (Chapter 6.2)
• Mount the front castors (Chapter 6.3)
• Put the back rest back, and mount the  

   recline gas strut to the back rest using  
   the locking bolt. (chapter 6.5)
   mount the arm support. ( chapter 6.11)

• Mount the seat cushion (Chapter 6.9)
• Mount the leg supports (Chapter 6.10)
• Mount the head support (Chapter 6.11)
• Set anti-tip in active position 

   (chapter 6.7)

• Mount accessory. (See chapter 5 for more   

   information. mounting descriptions will 
   folloe the accessory.)

Adjust the wheelchair to the user:
Adjust seat depth and eventually the 
wheelchair balance, leg support height, 
arm support height, head support height 
and depth, chair back cushion height.

for more information about adapting  

       the wheelchair to the user, please see:
       My-Netti.com  Knowledge center.

for troubleshooting, see chapter 10. 

       for mounting and adjustments see 
       chapter 6.

Announcements to product safety  

       and eventually product recalls will be  
       published on our home page 
       www.My-Netti.com

Drive carefully!

be aware that friction against push  

        rims can create a warm surface. 

         

Salt water can increase risk of    

        corrosion. further precautions related 
        to environmental conditions not 
        needed.

When the chair is tilted rearwards,   

       the anti tips and brakes should   
       always be in use.

be sure to lock all handles properly.

The anti-tips should always be used   

       for the safety of the user.

 Watch out for pinching danger when 
folding and unfolding, tilting, reclining 
and all other adjustment movements.

Surface temperature of metal parts in 

       frame structure might increase when 
       exposed to direct sunlight.

Never stand on the foot plates due  

        to risk of tipping forwards.

Never lift the wheelchair by the leg 

       supports, arm supports or head  
       support.

Product configuration may vary  

       between different countries.

for visually impaired people,  

        manuals and catalogues can be  
        downloaded at www.My-Netti.com

If in doubt - contact your dealer!

8

  

my-netti.com

Model: 

NettI 4U CE PLUS and CES PLUS

Language: 

English

 Version: 

2017-06

Содержание Netti 4U comfort CE PLUS









































Отзывы: