Altuna AB32, Руководство пользователя

Страница: 27 / 36

ALTUNA
AB32
27
EN
Meanings of Shears Alarms
Alarm Content
The Mainboard’s LED
Flashes for Several
Times
The Mainboard’s BUZ
Rings ForSeveral
Times
Display Fault
of the
LED
No Fault 0 0 E00
Anti-hand Cutting Protection 1 1 E01
Current Sensor Error 2 6 E02
MOS Tube Damage 3 6 E03
Hall Fault/Blade Breaking 4 3 E04
Peak Overcurrent/Average
Current Protection
5 5 E05
Blocked Opening/Blocked Rotor 6 3 E06
Default Phase 7 4 E07
Undervoltage/Overvoltage 8 1 E08
MOS/Chip Over-temperature 9 6 E09
PWM Communication Failure/
Shears Bit Voltage Error
10 2 E10
Shears Bit Type Error 10 7 E10
EEPROM Error 11 6 E11
Phase Detection Failure 12 4 E12
Programming Error 13 6 E13
> Historical Pruning Times 14 5 E14
> Maintenance Pruning Times 15 5 E15
The Number of Batteries in the
Shears Bit and Battery Pack is
Different
16 9 E16
The Mainboard Fails to Commu-
nicate with the Battery Pack
17 10 E17
USE, MAINTENANCE AND PRECAUTIONS OF BATTERY
|
BATTERY CHARGING
The battery of the new product is not fully charged. Place the battery on the desktop, insert
the charger output jack into the battery socket, and then plug the charger plug into the
power socket. When the indicator light lights up, charging starts. When the indicator light of
the charger is red, it indicates that the charger is charging; when it is green, the charging is
done and the battery can be used.
CHARGING STEPS
Place the battery on the desktop
and insert the charger plug into
the battery.
Plug the charger into a power
outlet;
When the indicator light of the
charger is red, it indicates that
the charger is charging; when it
is green, the charging is done.
Clear up, clean and pack.
1
2
3
1
2
3
The display will be reminding you when the battery capacity is less
20%. It was stopped working automatic when the battery capacity
is less 5%.
PRECAUTIONS
Each indicator light represents the charging state of one USB. This charger has three/
two USB ports. Two-port and three-port chargers are optional based on the model of the
product you purchase.
Please use the charger included for charging, on which there is an indicator light
corresponding to each charging plug (whetherfor individual charging or multiple
charging, please refer to the indicator light on the charger to determine if charging
is completed. The charger adopts a sequential charging method instead of simul-
taneous charging.)
Note: Whether the battery is connected or the power supply is not
connected, the indicator light is green.