Altuna AB32, Руководство пользователя

Страница: 26 / 36

ALTUNA
AB32
26
EN
Meanings of Shears Alarms
Alarm Content
The Mainboard’s LED
Flashes for Several
Times
The Mainboard’s BUZ
Rings ForSeveral
Times
Display Fault
of the
LED
No Fault 0 0 E00
Anti-hand Cutting Protection 1 1 E01
Current Sensor Error 2 6 E02
MOS Tube Damage 3 6 E03
Hall Fault/Blade Breaking 4 3 E04
Peak Overcurrent/Average
Current Protection
5 5 E05
Blocked Opening/Blocked Rotor 6 3 E06
Default Phase 7 4 E07
Undervoltage/Overvoltage 8 1 E08
MOS/Chip Over-temperature 9 6 E09
PWM Communication Failure/
Shears Bit Voltage Error
10 2 E10
Shears Bit Type Error 10 7 E10
EEPROM Error 11 6 E11
Phase Detection Failure 12 4 E12
Programming Error 13 6 E13
> Historical Pruning Times 14 5 E14
> Maintenance Pruning Times 15 5 E15
The Number of Batteries in the
Shears Bit and Battery Pack is
Different
16 9 E16
The Mainboard Fails to Commu-
nicate with the Battery Pack
17 10 E17
FAIL INDICATIONS |
In case of any fault, please handle it according to the prompt code on the display
screen.
Fault prompt on the display screen:
When using this product, if the following code appears on the screen, repair or handle accor-
ding to the corresponding fault prompt.
E14: defined, unexecuted protection;
E15: defined, only unexecuted protection is reminded and the display board beeps five times
per minute;