Altuna AB32, Руководство пользователя

Страница: 32 / 36

ALTUNA
AB32
32
EN
SAFETY PRECAUTIONS |
Warning! Please read all instructions carefully and failure to follow
all of the instructions below may result in electric shock, fire or
other serious injury!
Note: Keep the cutting edge closed when the shears stop working.
SAFETY INSTRUCTIONS FOR WORK SITES
1. Keeping the workplace clean and bright, for chaotic and dark workplacesmay cause acci
dents.
2. Do not operate the electric pruning shears in explosive, flammable and humid environments.
3. Operate the electric pruning shears only after children and onlookers leave the operating
site to avoid accidental injury during operation.
ELECTRICAL SAFETY INSTRUCTIONS
1. The battery socket of the shears must match the battery connector. Do not modify the
socket and plug in any way.
2. Do not expose the shears to rain or moisture. Water or other liquids entering it may increase
the risk of electric shock and damage to the device.
3. Do not misuse wires; do not use the power cord to lift, pull the shears or pull out its plug;
keep the shears away from heat, oil, sharp edges or moving parts; do not use the charger
when the power cord or plug is damaged. Damaged and entangled wires can increase the
risk of electric shock.
PERSONAL SAFETY INSTRUCTIONS
1. Be alert, pay attention to the operation and keep awake when operating the shears. Do not
operate them under fatigue, medication and alcohol reaction. Distraction during operation
may cause serious personal injury.
2. Use safety guards and always wear goggles, etc. Under appropriate conditions, dust
masks, non-slip safety shoes, helmets, hearing protection, etc. can reduce personal injury.
3. Remove all adjustment keys and wrenches before turning on the shears. Any wrench or
key left on the rotating parts of the shears can cause personal injury.
4. When operating, do not stretch your hands too long, keep your hands away from the work
area, never extend your hands under the material for any reason, ensure that any material
or surface under the operating area is not damaged, and always pay attention to the
balance between the feet and the body to better control the shears in case of any accident.
5. Dress properly, do not wear loose clothes or ornaments and keep your hair, clothes and
sleeves away from moving parts, for loose clothes, ornaments or long hair may get caught
in moving parts.