NetWay8MV / NetWay16MV
- 7 -
NetWay8MV/NetWay16MV User Interface and Programming:
Note: A constant PC connection is not required for proper operations and is used as a local programming/monitoring
tool only.
Step 1 . Set Local Area Connection of your laptop to Static IP mode .
Static IP address of the laptop must be assigned to the same network as the current IP address of
NetWay8MV/NetWay16MV . The default IP address of NetWayMV units is 192 .168 .168 .168 .
This manual assumes that it has not been changed by user .
For Windows XP:
a . Open Network Connections by clicking
Start button, then clicking Settings, then clicking
Network Connections .
b .
Right
click
the
Local Area Connection . Click Properties . Administrator permission required
If you are prompted for an administrator password or confirmation, type the password or
provide
confirmation .
c .
Double
click
Internet Protocol (TCP/IP) menu item .
d .
Choose
the
Use the following IP address option .
e . Set the IP address to 192 .168 .168 .15 (or another valid IP address on the same network) .
f .
Click
OK . Close all windows .
For Windows 7:
a . Open Network Connections by clicking the
Start button, clicking Control Panel, clicking Network
and
Internet, clicking Network and Sharing Center, and then clicking Change Adapter Settings .
b .
Right
click
the
Local Area Connection icon, and then click Properties . Administrator permission
required . If you are prompted for an administrator password or confirmation, type the password or
provide
confirmation .
c .
Click
the
Networking tab . Under this connection uses the following items, click either Internet
Protocol
Version
4 (TCP/IPv4) and then click Properties .
d .
Choose
the
Use the following IP address option .
e . Set the IP address to 192 .168 .168 .15 (or another valid IP address on the same network) .
f .
Click
OK . Close all windows .
Step 2. Connect a laptop or PC to the Ethernet port of your NetWayMV unit .
The NetWayMV unit should be powered up at this moment .
Step 3. Open a browser window (it is necessary to update your browser software to the latest version so that the
pages display and function correctly) .
Step 4. Enter the NetWayMV IP address (the default IP address is 192 .168 .168 .168) into the address bar .
Status page will be displayed .
Step 5. Click Setup link . Setup page will be displayed . You may now program your NetWayMV .
All NetWayMV units come factory set:
a .
Ports
-
Enabled .
b . Ports - PoE Shutdown Disabled .
c . Power Allocation Mode - Class restricted .
Port Priority:
NetWayMV port priority is designated 1 through 8, with 1 as the highest and 8 as the lowest ports so that power
will be allocated to the port with the highest priority first and the lowest priority last . This will ensure that ports
with the higher priority will continue to operate in the event the NetWayMV is overloaded .
NetWay8MV -
Port priority is factory set at 1 through 8 for ports 1 through 8 .
NetWay16MV - Port priority is factory set at 1 through 8 for ports 1 through 8
and 1 through 8 for ports 9 through 16 .
Port Identification:
NetWayMV allows you to identify each port (ID up to 8 characters) .
1 . Type the desired ID into the text box for each corresponding port .
2 . Click
Submit to save the changes or proceed with programming .
