NetWay8MV / NetWay16MV
- 5 -
Installing a NetWay1512 Adapter for 12VDC IP Cameras up to 13W:
1 . Mount NetWay1512 in proximity to IP camera
(Fig. 2, pg. 5) . Affix one side of velcro (supplied)
to NetWay1512 and the place the second side of the
velcro in the desired location .
2 . Connect structured cable from port marked [IN] on
NetWay1512 to any ports marked [OUT] of
NetWay8MV/16MV
(Fig. 2, pg. 5, Fig. 1a, pg. 4) .
3 . Connect structured cable from port marked [OUT]
on NetWay1512 to the IP camera (Fig. 2, pg. 5) .
4 . Connect 12VDC output from NetWay1512 terminals
marked [– 12VDC +] to the power input of the
IP camera (Fig. 2, pg. 5) . Polarity must be observed .
5 . Power LED indicator will illuminate on NetWay1512
under normal conditions (Fig. 2, pg. 5) .
Installing a NetWay3012 Adapter for 12VDC IP PTZ up to 25W:
1 . Mount NetWay3012 in proximity to IP camera
utilizing mounting hole (Fig. 3, pg. 5) . Use a proper
fastener and/or wall anchor when securing
NetWay3012 to the wall .
2 . Connect structured cable from port marked [IN] on
NetWay3012 to ports marked [OUT] of NetWay8MV/
NetWay16MV
(Fig. 3, pg. 5, Fig. 1a, pg. 4) .
3 . Connect structured cable from port marked [OUT] on
NetWay3012 to the IP fixed or PTZ camera
(Fig. 3, pg. 5) .
4 . Connect 12VDC output from NetWay3012 terminals
marked [+ 12VDC – ] to the power input of the
IP camera (Fig. 3, pg. 4) . Polarity must be observed .
5 . Power LED indicator will illuminate on NetWay3012
under normal conditions (Fig. 3, pg. 5) .
Installing a NetWayXT/NetWayXTX Repeater Module:
NetWayXT will work only with PoE devices .
NetWayXTX will work with PoE/PoE+ devices .
1 . Mount NetWayXT/NetWayXTX in desired location
utilizing the mounting hole (Fig. 4, pg. 5) . Use a
proper fastener and/or wall anchor when securing
NetWayXT/NetWayXTX to the wall .
2 . Connect structured cable from port marked [OUT]
on NetWay to port marked [IN] on the NetWayXT/
NetWayXTX
(Fig. 4, pg. 5, Fig. 1a, pg. 4) .
3 . Connect structured cable from port marked [OUT]
on NetWayXT/NetWayXTX to the PoE/PoE+
camera/edge device or next NetWayXT/
NetWayXTX repeater (Fig. 4, pg. 5) .
4 . Port status LEDs will illuminate on NetWayXT/
NetWayXTX indicating the port is operational
(refer to LED Definitions) .
5 . Power LED will illuminate indicating 12VDC output .
Port LED Definitions for NetWayXT Repeater:
Status
Green LED
Yellow LED
OFF
Indicates it is connected as 10Base-T or no link .
Indicates no link .
ON
Indicates it is connected as 100Base-TX .
Indicates a link .
Blinking
–
Indicates activity .
Port LED Definitions for NetWayXTX Repeater:
Status
PoE/PoE+ Output LED
PoE/PoE+ Input LED
Yellow LED
OFF
No PoE/PoE+ Output
No PoE/PoE+ Input
Indicates no link .
ON
Normal PoE/PoE+ Output
PoE/PoE+ Input
Indicates a link .
Blinking
–
–
Indicates activity .
NetwayXT
Repeater
www.altronix.com
IN
OUT
Power
Power
LED
Structured Cable
from NetWay8/16
Structured
Cable from
NetWay8/16
Structured Cable
to IP Camera/Edge Device
or next NetWayXT
PoE/PoE+
Output LED
Structured
Cable to
PoE/PoE+
Camera/Device or
next NetWayXTX
Port Status
LEDs
PoE/PoE+
Input
LED
NetWayXT
NetWayXTX
www.altronix.com
IN
OUT
Netway1512
Adapter
12VDC
--- Output +
-- +
12VDC
Output
Structured
Cable from
NetWay
Structured Cable
from IP Camera/Device
Power
LED
www.altronix.com
IN
OUT
Netway3012
Adapter
12VDC
+ Output ---
Power LED
12VDC
Power to
Camera
--
+
Structured Cable
from IP Camera
I.T.E. 43KC
Structured Cable
from NetWay8,
NetWay8M, NetWay16
or NetWay16M
Fig. 2 - NetWay1512
Fig. 3 - NetWay3012
Fig. 4 - NetWayXT/NetWayXTX
