- 12 -
NetWay8MV / NetWay16MV
Altronix is not responsible for any typographical errors .
140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056
website: www .altronix .com | e-mail: info@altronix .com | Lifetime Warranty | Made in U .S .A .
IINetWay8MV/NetWay16MV K07S
MEMBER
Mounting Options:
Rack Mount Installation
1 . Remove and discard factory installed screws from both sides of rack chassis (Fig. 8a) .
2 . Install mounting brackets (A) on the left and right side of rack chassis using the four (4) flat head screws (B)
(included) (Fig. 8b) .
3 . Place unit into desired EIA 19” rack position and secure with mounting screws (not included) (Fig. 8c).
A
B
Fig. 8b
Fig. 8a
Fig. 8
Fig. 8c
Top
Top
Top
Front
Left
Front
Left
Front Left
Remove
Wall Mount Installation
1 . Install mounting brackets (A) on the left and right side of rack chassis using four (4) flat head screws (B)
(included)
(Fig. 9a) .
2 . Place unit at desired location and secure with #6 size screws or larger (not included) (Fig. 9b).
Caution: It is necessary to make sure mounting screws are securely fastened
to a beam when installing the unit vertically .
B
A
Fig. 9
Fig. 9b
Fig. 9a
Dotted lines indicate studs behind sheetrock.
Shelf Installation
1-
Position and affix rubber pads (C) (included) at each corner on the bottom of the unit (Fig. 10) .
2-
Place unit in desired location .
Fig. 10
C
Left Side
Rubber
Pad
B
A
C
Mounting Hardware
(Included)
:
Two (2) mounting brackets
Six (6) flat head screws
for mounting brackets .
Four (4) rubber pads .
