- 6 -
eFlow104N Series Installation Guide
Fig. 2 -
Battery trouble indication
For Canadian use, a red indicating lamp must be visible from the exterior of this enclosure.
Wire one leg of a UL Listed, power-limited power source to the indicating lamp.
Wire the second leg of the power source to the indicating lamp in series with the battery fail relay contact termi-
nals marked [BAT FAIL - C, NO] (Fig. 2, pg. 6).
NC C NO
NC C NO
BAT FAIL
AC FAIL
POWER
SOURCE
RED INDICATING
LAMP
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Power Distribution Module(s):
Fig. 3a - PD8UL Power Distribution Board
Fig. 3b - PD8ULCB - Power Distribution Board
Non Power-Limited Outputs
Class 2 Power-Limited Outputs
Fig. 4a - PD16W Power Distribution Board
Fig. 4b - PD16WCB - Power Distribution Board
Non Power-Limited Outputs
Class 2 Power-Limited Outputs
N
COMMON POWER OUTPUTS
P
FUSED POWER OUTPUTS
1
2
3
4
5
6
7
8
D1
INPUT
R1
LED
DC Output to devices
1P-8P Power Outputs,
1N-8N Common Outputs
From Power Supply
Board
(Factory Installed)
Replace fuses with the same type and rating 3.5A/250V
N
COMMON POWER OUTPUTS
P
FUSED POWER OUTPUTS
1
2
3
4
5
6
7
8
D1
INPUT
R1
LED
DC Output to devices
1P-8P Power Outputs,
1N-8N Common Outputs
From Power Supply
Board
(Factory Installed)
common
outputs
protected
outputs
P
N
N
P
S
Input
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
P
N
3.5A 250V
For continuous protection against risk of fire
replace fuses with same type and rating
DC Output to devices
1P-16P Power Outputs, 1N-16N Common Outputs
From
Power
Supply
Board
(Factory
Installed)
N
P
S
Inpu
t
N
P
common
outputs
protected
outputs
P
N
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
DC Output to devices
1P-16P Power Outputs, 1N-16N Common Outputs
From
Power
Supply
Board
(Factory
Installed)
