8
5
Frame Assembly
Before you position your side section onto the dwarf wall you should drill the pilot holes in the
bottom of the side corner bars shown in diagram 6. The position of this hole should be about 19mm
from the side face and 30mm measured from the bottom of the bar.
You can now position the side section on the aluminium base, you will need a helper to hold this in
place or simply strap it to a set of steps.
Now offer the front gable to the side assembly slotting the
corner bar onto the end of the eaves bar, do not fix this
joint until the bottom joint is fixed (diagram 6). Screw the
bottom of the corner glazing bar to the end of the cill
(80mm screw) making sure the rebate for the glass lines up
with the front face of the side cill (diagram 5).
Dia. 6
Dia. 5
