7
Side Assembly
4
Diagram 2
EV0
176
EV0489
EV
01
76
EV0489
Make sure the side bars are pushed all the
way in, you may find they need a light tap
with a wooden mallet or something similar.
(If you are going to glue your joints this is the
first point you would do this. )
50mm Scre
w
Pilot hole, it is
easiest to drill
down through the
middle of the
mortise to make
sure you get the
hole in the correct
position
Internal
EV0489
EV
042
3
Diagram 3
Internal
The side base plates should be fitted flush to the
ends of the side cills as shown in diagram 4. Fix
with 25mm screws.
Keep flush
at this point
EV0176
Diagram 4
EV0
648
M