background image

18

1

General Data

1.1

Important to bear in mind

These Operting Instructions should be handed to the personnel attending your Wap Machine. If these instructions are
closely adhered to ad observed, the machine will function unobjectionably, rendering you a perfect service.

You are asked to exclusively use Wap Cleaning and Care Agents, which are particulary attuned to match with Wap
machines. Times over again, we must ascertain that problems popping up in conjunction with the machine(s) , have
to be ascribed to the use of inappropriate products .

Please note: The warnings and safety advices of the producer of chemicals are to be closely followed ad abserved.

1.2

Intended Use

The Table below is to give you a survey over the numerous applications of these machines, as well as over the Wap
Cleaning and Care Agents specially developed and brought out to match these machines:

 2   dosing valve

51    instrument  board

 5   motor

52    water outlet

11  pressure gauge

53    spray  lance rest (clamp)

12  tap water feed

54    intake hose for cleaning and care agents

50  switch

50

23

2

11

51

53

5

54

52

31

Unsuitable cleaners lead to poor cleaning results and may cause
damage to the machine. Predilute concentrate as described.

Quantity

No.

Usual

dilution

beforehand

pH-value in

1% solution

in tap water

ca.

WapClean Shampoo
Intensive action concentrate for removing dust, soot, grease, oil and insect
residues; suitable for sensitive surfaces. Demulsifying effect. Residuary oil content
<20 mg/l.

20 kg

220 kg

80848
80804

1:20

8,6

WapClean Intensive Cleaner
Cencentrate for universal application. Suitable for heavily soiled engines, machine
parts, halls, trucks, tarpaulins. Demulsifying effect. Residuary oil content <20mg/l.

20 kg

220 kg

80849
80748

1:10

8,8

WapClean Gloss Wax
Quick drying, with mineral oil base, for application after car wash. Provides a
weather-proof protective layer.

20 kg

220 kg

80850
80806

1:100

7,0

Содержание CS 1020 DE




















Отзывы: