SPO
TLIGHT
4. CONTROL ELEMENTS
6
By pressing this button, you will activate a 75 Hz
low frequency filter with a slope of 18 dB per octave.
You can use this facility to reduce the hum noise
infected by the mains power supply, or the stage
rumble while using a microphone.
This control is provided with 2 different indications: One is for the MIC and the
other for LINE levels. When you use a microphone, you shall read the MIC ring
(0~-45dB); when you use a line level instrument, you shall read the LINE ring
(+15~-30dB). For optimum operation you shall set this control in a way that
the PEAK LED(18) blinks only occasionally in order to avoid distortion on the
input channel.
When you use a line level instrument, you shall read the ring (+20~-20 dB).For
optimum operation you shall set this control in a way that the PEAK LED(18)
blinks only occasionally in order to avoid distortion on the input channel.
This LED will help you to detect the input level
immediately. In this case the research of the
fault will become much faster!
dB
LEVEL SET
17/18
GAIN
20
20
GAIN
1
LINE
MIC
dB
0
LEVEL SET
15
30
45
LOW CUT
75Hz
18dB/Oct
EQUALISER
There are
1-16: HI, MID
and LOW band. There are
the stereo channel17-20:
HI, HI-MID, MID-LOW and LOW band. All bands provide up to 15dB of boost or cut.
3 bands EQ with sweepable MID on all mono input channel
4 bands fixed frequency EQ on
5
7
6
5 MONO IN GAIN
6 LEVEL SET LED
7 LOW-CUT Button
6
8
8 STEREO IN GAIN
9
10
13
80Hz
LOW
FREQ
MID
EQ
HI
12kHz
800
15
15
100Hz
8KHz
15
15
15
15
11
12
13
9
80Hz
LOW
MID-LOW
500Hz
3kHz
HI-MID
EQ
HI
12kHz
15
15
15
15
15
15
15
15
