manualshive.com logo in svg

Alto APM200, Руководство пользователя

Поделиться
Скачать
Alto APM200 Скачать руководство пользователя страница 3

IN THIS MANUAL:

1. INTRODUCTION................................................................................1
2. FEATURES.......................................................................................1

4. CONTROL ELEMENTS......................................................................5
5. INSTALLATION & CONNECTION......................................................15

1. INTRODUCTION

Thank you for your purchasing of the

LTO APM200 20 channels power mixer with 24-bit

digital multi-effect built-in. It is just one of the many

LTO products that a talented,

multinational Team of Audio Engineers and Musicians have developed with their great
passion for music. Your APM200 is a remarkable compact powered mixer that doesn't
find many equals in the market today. With 16 microphone and 2 stereo Line-level inputs
for serious live performances, your APM 200 also includes a 24 Bit digital multi-effect
with 16 Factory Presets and 16 variations for every preset, for a total of 256 different
digital effects. There is a three bands EQ on mono input channels, four bands EQ on
stereo input channels. Use it for small Gigs, for Church applications and for Conference.

Enjoy your APM200 and make sure to read this Manual carefully before operation!

2. FEATURES

16 MONO inputs with gold plated XLR and balanced TRS jacks.

2 Stereo input channels with balanced TRS jacks.

GAIN and +48V Phantom power for mono/MIC inputs.

Peak LED in each channel.

3-band EQ with sweepable MID on mono inputs.

4-band EQ on stereo inputs.

24-bit internal DSP with 256 effects, 16 presets by 16 variations with DSP

mute switch and peak LED.

9-band graphic EQ.

BNC socket for connecting gooseneck lamps.

Low cut filters 75 Hz, 18 dB/OCT. on mono inputs.

Low pass filter on mono output (80~120 Hz).

High accurate 12-segment Bar graph Meters.

Maximum Output Power(EIAJ):

A-B: 750 W+750 W/4 Ohms (1500 W bridge/8 Ohms)

C-D: 500 W+500 W/4 Ohms (1000 W bridge/8 Ohms)

1

7. BLOCK DIAGRAM..........................................................................21
8. TECHNICAL SPECIFICATIONS...........................................................22
9. WARRANTY..................................................................................24

3. QUICK START..................................................................................3

6. PRESET LIST.................................................................................20

Содержание APM200




























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды