22
Main Mix Section
Noise (Bus noise)
Fader 0 dB, channels muted:
85dBr (ref.:+4dBu)
Distortion (THD & N)
Frequency response
10 Hz to 55 kHz, +/
3 dB
0.005% at +4 dBu, 1 kHz
Gain
0 dB to 45 dB (MIC)
115 dB
electronically balanced
10 Hz to 55 kHz, +/
3 dB
Distortion (THD & N)
0.005% at +4 dBu, 1 kHz
Gain
-15 dBu to 30 dBu
electronically balanced, discrete input configuration
Mono input channels
Microphone input
SNR (Signal to Noise Ratio)
Frequency response
Line input
Stereo input channels
Impedances
Line input
Unbalanced
Frequency response
10 Hz to 55 kHz, +/
3 dB
Distortion (THD & N)
0.005% at +4 dBu, 1 kHz
Microphone input
1.4 kOhm
Channel Insert return
2.5 kOhm
All other inputs
10 kOhm or greater
Tape out
1 kOhm
All other output
120 Ohm
Mono Equalization
Mid-peak/dip
+/
15 dB -frequency range 100~8 kHz
Low-shelving
+/
15 dB @ 80 Hz
UNITY gain:
100 dBr (ref.:+4 dBu)
+22 dBu balanced ,
ST SUB OUT
+22 dBu
DSP Section
A/D and D/A converters
DSP resolution
24-bit
Type of effects
Hall, Room, Vocal & Plate REVERBS
Mono & Stereo DELAY (max DELAY TIME 650ms)
Chorus, Flanger & Reverb MODULATIONS
DELAY, CHORUS,
Presets
256
Controls
16-position PRESET Selector
16-position VARIATION selector
CLIP LED
MUTE SWITCH with LED indicator
FLANGER combinations
Fader 0 dB, all input channels assigned and set to
Max output
Noise (bus noise)
Power supply
Main voltage
100 VAC ~ 60 Hz
230 VAC ~ 50 Hz
120 VAC ~ 60 Hz
240 VAC ~ 50 Hz
Power Consumption
C-D
Stereo mode: 2
500 W @ 4 ohm(EIAJ)
Bridge mode: 500W @ 8ohm
300W @ 8ohm
Hi-shelving
+/
15 dB @12 kHz
Stereo Equalization
Mid-peak/dip
+/
15 dB @3 kHz
Mid Low-peak/dip
+/
15 dB @ 500 Hz
Hi-shelving
+/
15 dB @12 kHz
Low shelving
+/
15 dB @ 80 Hz
24-bit
AUX Sends max out
+22 dBu
Bridge mode: 1000 W @ 8 ohm(EIAJ)
Main Mix Section
A-B
2
520 W @ 4 ohm(RMS)
Stereo mode: 2
750 W @ 4 ohm(EIAJ)
2
340 W @ 4 ohm(RMS)
Bridge mode: 1500 W @ 8 ohm(EIAJ)
8. TECHNICAL SPECIFICATION
