SPO
TLIGHT
4. CONTROL ELEMENTS
10
This jack will be used to send the signal to a headphone or to a pair of powered
studio monitors.
29 LAMP
This lovable LAMP is very convenient for your operation, it is located in the top
right corner of the front panel, and provides the 12V socket that can drive
standard BNC-type lamp.
This control is used to adjust the level of PHONES
output, which can be varied from -
to +10.
The ST knob is used to adjust the amount of stereo
signal sent from the ST SUB IN1-2 jacks to the
STEREO bus.
32 PHONES Control
These knobs are used to adjust the amount of the
signal sent from the ST SUB IN1-2 jacks to the
AUX1-2 buses.
35 AUX1-2 Controls
36 ST (stereo ) Control
37 PFL (pre-fader listen) Switch
When this switch is engaged, the signal at the point before the ST control
knob is sent to the PHONES jack.
28 PHONES Jack
30
32
34
37
35
36
33 ST (stereo) Control
This knob is used to adjust the level of the signal sent from the 2TR IN jacks
to the STEREO bus. The adjustable range goes from -
to +10dB.
34 PFL Switch
When this switch is engaged, the signal input from the 2TR IN jacks is routed
at the point before the ST control to the PHONES jack.
The LED indicates when the power is switched on.
31 POWER LED
31
33
The stereo LED meter will indicate the signal level sent to ST OUT outputs.
30 LED METER Display
1
2
ST
PFL
ST
1
2
PFL
AUX
AUX
10
8
10
8
10
8
10
8
10
8
10
8
ST SUB IN
1
ST SUB IN
2
L
R
2
4
10
20
7
30
10
CLIP
2
4
7
0
POWER
PFL
ST
10
8
10
8
2TR IN
PHONES
