Alto 91WS Скачать руководство пользователя

Страница: 32 / 100

American-Lincoln

1 - 31

91 WS

LP SAFETY PRECAUTIONS

WARNING

Keep cigarettes, sparks, and open flame away when working on LP equipment when inspecting for gas leaks or

when LP tanks are present.

WARNING

Check all components for proper operation when needed. Replace LP components when needed. Never bypass

defective safety components.

WARNING

Check routing of all LP hoses. Keep them away from sharp edges, exhaust manifolds, or other hot surfaces.

Check for signs of abrasion or deterioration.

WARNING

Check for gas odor before and during starting operations. If gas odor is noticed, stop and check for leaks or

component malfunction.

WARNING

Make sure LP tank is free of dents and gouges.

WARNING

Make sure service coupling is clean and free of damage. Make sure service coupling of tank matches machine

service coupling.

WARNING

Keep engine properly tuned.

WARNING

Make sure the LP tank matches the fuel system.

WARNING

Make sure the LP tank is securely mounted on the machine with the retainer bracket clamping the tank with the

locating pin in position.

WARNING

Park the machine in a shaded, cool area when not in use.

WARNING

Keep the LP tank service valve closed when the tank is not in use.

WARNING

Never overfill the LP tank. Fill the LP tank to the recommended weight stamped on the tank.

WARNING

Use care in handling LP tanks. Never drag or drop them.

WARNING

Always store and transport LP fuel tanks with the safety relief valve in the “UP” position.

WARNING

Avoid contact with the LP fuel to avoid frostbite.

WARNING

When the machine is to stand unused for a period of time (overnight), park the machine in a designated area. Shut

off the service valve at the tank and operate the engine until the remaining fuel is consumed. Turn off the ignition

switch.

Содержание 91WS





































































































Результаты поиска

Содержание 91WS

Отзывы:

Похожие инструкции для 91WS

Бренды по названию

Популярные бренды

Alto 91WS, Руководство оператора

Результаты поиска

Содержание 91WS

Отзывы:

Похожие инструкции для 91WS

Бренды по названию

Популярные бренды