manualshive.com logo in svg

Alto 91WS, Руководство оператора

Поделиться
Скачать
Alto 91WS Скачать руководство пользователя страница 9

1-8

American-Lincoln

91 WS

WARNING

Do not use this machine as a step or furniture.

WARNING

Be careful when operating the machine on a ramp or incline. Always move slowly on a ramp. Do not turn this

machine on a ramp. Do not stop and leave this machine on a ramp.

WARNING

 Stop and leave this machine on a level surface. When you stop the machine, put the key switch in the “OFF”

position.

WARNING

 To prevent injury, and damage to the machine, do not lift the machine or move it to an edge of a stair or loading

dock.

WARNING

 Lead acid batteries generate gases which can cause an explosion. Keep sparks and flames away from batteries.

NO SMOKING. Charge batteries only in area with good ventilation and always leave the top cover open while

charging batteries. Do not disconnect the charger from the batteries before disconnecting the AC power cord.

Disconnecting the battery cable with the charger plugged in could cause an explosion.

WARNING

 Always wear eye protection and protective clothing when working near batteries. Remove all jewelry. Do not put

tools or other metal objects across the battery terminals, or the tops of batteries.

WARNING

Maintenance and repairs must be done by authorized personnel only. Tighten all fasteners. Keep adjustments

according to the specifications given in the service manual for the machine. Keep the electrical parts of the

machine dry. For storage, keep the machine in a building.

WARNING

 Make sure that all labels, decals, warnings, cautions and instructions are fastened to the machine. Get new labels

and decals from American-Lincoln.

SAFETY PRECAUTIONS

Содержание 91WS





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды