Alto 91WS Скачать руководство пользователя | Manualshive

Страница: 18 / 100

background image

American-Lincoln

1 - 17

91 WS

POST OPERATION CHECKLIST
After stopping the machine perform these post operation checks.

  1. Check sweeping brooms for wear or damage.
  2. Check all flaps for wear, damage or adjustment.
  3. Close the supply valve on the LP cylinder. Check the fuel level and install a filled cylinder if needed.
~3. Fill the fuel tank.
*3. Charge the batteries.
  4. Perform the scheduled maintenance according to the service chart.

- = LP powered machines only.
~= Gasoline powered machines only.
* = Battery powered machines only.

BATTERY CHARGING INSTRUCTIONS
Charge the batteries at the end of each day or when the battery condition meter indicates low battery voltage.
The batteries need to be charged when the needle stays in the “red” zone while the machine is being operated.
When charging batteries, only use the quick disconnect provided. Use the quick disconnect to insure correct
polarity.

Check the liquid level in the batteries a least once a week and add water when low. Use only distilled water. Fill
the batteries after charging the batteries to prevent electrolyte from spilling over on to the tops of the batteries
during the charging process.

WARNING

The use of an extension cord with the charger should be avoided. Risk of fire and electrical shock is possible if the

wrong type or size extension cord is used. If an extension cord must be used, only use a three conductor number

12 AWG cord with ground, properly wired, in good electrical condition and keep it as short as possible. Locate all

cords so that they cannot be stepped on, tripped over, or otherwise subjected to damage or stress.

WARNING

Verify that the AC power source to which the charger is to be connected is capable of supplying the current

specified on the charger nameplate.

WARNING

Keep all charger ventilation holes at least 2 inches away from walls or other objects. Do not allow vent holes to

become obstructed.

WARNING

Do not operate charger that has been damaged or shows physical signs of damage. Have charger serviced by a

qualified professional repair person.

WARNING

Lead acid batteries generate gases which can cause an explosion. Keep sparks and flames away from batteries.

NO SMOKING. Charge batteries only in area with good ventilation and always leave the top cover open while

charging batteries. Do not disconnect the charger from the batteries before disconnecting the AC power cord.

Disconnecting the battery cable with the charger plugged in could cause an explosion.

OPERATING INSTRUCTIONS

«
...
16
17
18
19
20
...
»

Содержание 91WS





































































































Отзывы:

Нет отзывов

Похожие инструкции для 91WS

Бренд: Echo Страницы: 26

Бренд: Kärcher Страницы: 5

Бренд: Kärcher Страницы: 23

Бренд: FERREX Страницы: 40

PB-413H - PARTS CATALOG SERIAL NUMBER P06413001001 -...

Бренд: Echo Страницы: 36

Бренд: Larson Electronics Страницы: 2

Бренд: Ariens Страницы: 58

Бренд: EINHELL Страницы: 84

Бренд: XPower Страницы: 44

Thermo-bug AirBlower

Бренд: Fleschhut Страницы: 5

Бренд: Craftsman Страницы: 27

Craftsman C950-52943-0

Бренд: Craftsman Страницы: 112

Бренд: GreenWorks Pro Страницы: 9

Бренд: GreenWorks Pro Страницы: 32

Бренд: MTD Страницы: 20

Бренд: Smithco Страницы: 66

Бренд: Ukoke Страницы: 9

Бренд: Erskine Attachments Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды