background image

# 8 2 4   O p e r a t i o n   a n d   C a r e   M a n u a l   •   9.

C A R E   A N D   C L E A N I N G

PROTECTING STAINLESS STEEL SURFACES

It is important to guard against

corrosion in the care of

stainless steel surfaces.

Harsh, corrosive, or

inappropriate chemicals can

completely destroy the

protective surface layer of stainless steel.  Abrasive

pads, steel wool, or metal implements will abrade

surfaces causing damage to this protective coating

and will eventually result in areas of corrosion.

Even water, particularly hard water that contains

high to moderate concentrations of chloride, will

cause oxidation and pitting that result in rust and

corrosion.  In addition, many acidic foods spilled

and left to remain on metal surfaces are

contributing factors that will corrode surfaces.

Proper cleaning agents, materials, and

methods are vital to maintaining the appearance

and life of this appliance.  Spilled foods should be

removed and the area wiped as soon as possible

but at the very least, a minimum of once a day.

Always thoroughly rinse surfaces after using a

cleaning agent and wipe standing water as quickly

as possible after rinsing.

CLEANING AGENTS

Use non-abrasive cleaning products designed for use

on stainless steel surfaces.  Cleaning agents must be

chloride-free compounds and must not contain

quaternary salts.  Never use hydrochloric acid

(muriatic acid) on stainless steel surfaces.  Always use

the proper cleaning agent at the manufacturer's

recommended strength.  Contact your local cleaning

supplier for product recommendations.

CLEANING MATERIALS

The cleaning function can usually be accomplished

with the proper cleaning agent and a soft, clean

cloth.  When more aggressive methods must be

employed, use a non-abrasive scouring pad on

difficult areas and make certain to scrub with the

visible grain of surface metal to avoid surface

scratches.  Never use wire brushes, metal scouring

pads, or scrapers to remove food residue.

C L E A N I N G   A N D   P R E V E N T I V E   M A I N T E NA N C E

Содержание 600-LVD





















Отзывы: