Alto-Shaam 1200-SK/III, Руководство пользователя

Страница: 19 / 36

MN-46411 • Rev 2 • 12/19 • 1200-SK/III Marine Cook, Hold, Smoke 19
Operation
Cook by Probe:
Press and release control On/Off Button.
• The green indicator light on the On/Off button will illuminate.
• The oven will beep for one second.
• The oven will begin operating in the hold mode.
• The amber hold indicator will illuminate.
• The previously set hold temperature will be displayed.
Press the Hold Button.
To change the hold temperature, press the Up or Down Arrow Buttons.
Note: If the oven is being used for hot food holding only, adjust the set holding
temperature. Do not press the Cook, Time, or Probe buttons.
Press Cook Button to preheat.
• The green indicator light on the Cook Button will illuminate.
• Last set cooking temperature will be displayed.
To change the cook temperature, press the Up or Down Arrow Buttons.
• The green indicator light on the Time Button and on the Probe Button alternately flash.
Press Probe Button.
• The green indicator light on the Probe Button will illuminate.
• Last set internal product temperature is displayed.
To change the internal product temperature, press the Up or Down Arrow Buttons.
• The green indicator light on the Probe Button will illuminate.
• Halo Heat and Pre-Heat indicator will illuminate.
The oven is automatically programmed to preheat to the cook temperature.
• The oven will beep when preheated and the preheat indicator extinguished.
• Both the Ready and Start indicator lights will flash.
The set cook temperature will be maintained by the oven and appear in the display
while in the ready/start mode.
Load the food inside oven. Remove probe from its bracket, wipe the probe tip with a disposable
alcohol pad and insert probe properly into the product. Close the oven door.
Note: Oven will beep 3 times every 25 seconds until oven is loaded and Start Button pressed.
Press and release Start button.
COOK
• The oven will beep.
• The green indicators for power, cook, probe, and start will illuminate.
• The display will alternate between showing the probe temperature and the elapsed time.
HOLD
• The oven will beep when the set probe temperature has been reached.
• The green indicator for cook will remain illuminated.
• The display will alternate between showing the set hold temperature and the amount of time the
product has remained in the holding mode.
• Ready indicator light will illuminate after 2 hours in the hold mode.
Note: The ready indicator does not necessarily indicate a product-ready state. For best results,
the product must remain in the oven at the set holding temperature for the minimum
number of hours indicated in the individual cooking instructions.
• The oven will remain operating in the hold mode until the control On/Off Button is pressed.