Altman Lighting 2 Circuit
Smart Track
Parts & Accessories
All part numbers ending in -* are available in white, black or silver.
Add the following codes to finish:
3-1
for Silver
2-2
for Black
1-3
for White
www.altmanlighting.com
DMX Track Terminator
Smart Track adapter with 100 ohm resistor wired across data
positive and data negative for ending a single DMX/ data run.
Must be used at the opposite end of the DMX/ data feed.
Part Number
ASL-99780-*
J-Box Cover
The J-Box cover can be used with any AC feed component.
Part Number
ASL-198600006*
Mounting Clip
Attaches to upper groove of track as shown. Can be
used with 3/8-18 threaded pipe (stem) or 1/4” thru
3/8” threaded rod w/ contractor supplied hardware.
Stem and canopy kits below.
Part Number
99-198000001-*
T-Bar Clip
For surface mounting with 15/16” T-Grid systems with support independ-
ent of ceiling. Silver only
Part Number
ASL-000004-01
Stem Mounting
Part Numbers
99-19810000900W-*
5” Diameter Canopy Kit for stem suspension. Needed
for attaching stem to J-Box or other structures.
99-19810002301W-*
3/8” Pendant Stem 24” Long
99-19810002401W-*
3/8” Pendant Stem 48” Long
Stems cannot be cut in the field unless the cut stem can be re-thread stem on
site.
7
