FIXTURE INSTALLATION PROCEDURE
PLEASE REFER TO THE DIAGRAMS BELOW OF THE
ALTMAN SMART-TRACK
®
ADAPTOR
2-CIRCUIT SMART TRACK ADAPTOR
1. Before installing the fixture to the Smart Track lighting track, set the control mode and/or fixture ad-
dresses as outlined above.
2. Insert fixture track adaptor into track making sure the two data bus contacts (9) are on the same side as
the data rail on the track.
3. While maintaining upward pressure on the adaptor, fully rotate the locking tab (3) ¼ turn until tab com-
pletely engages into its track slot. DO NOT RELEASE TRACK ADAPTOR UNTIL YOU HAVE
COMPLETED STEP 4.
4. While maintaining upward pressure on the adaptor, rotate the locking knob to either Circuit-1 or Cir-
cuit-2 until the contacts are fully engaged into their respective track slots. Caution: Locking into either
circuit will apply power immediately to the fixture.
5. Test the fixture.
6. Repeat steps 1-5 for each additional fixture.
www.altmanlighting.com
57 Alexander St., Yonkers, NY 10701
Tel: 1-800-4Altman Fax: 914-963-7304
Altman Lighting 2 Circuit
Smart Track Fixture Settings
22
