QUARTZ CONTROL INSTRUCTIONS FOR FIXTURES WITH SMART-DIMMER™
INSTALLED
There are four different selectable modes of control. Switches are located under the moveable access door on the side of
the electronics box.
The single RED (S1) 2-position binary DIP switch sets each mode of control.
The three WHITE (S2, S3, S4) 10-position rotary decimal switches set the DMX address or dimmer levels.
Red DIP switch S1 (2,1) Mode (
Fixture hanging down from Track
) White Rotary switches S4, S3, S2 (left-right)
Open (DN), Open (DN) Manual dimming control. Intensity levels 000% to 100% (S4, S3, S2).
Open (DN), Closed (UP)
Full ON.
Rotary switch settings are ignored.
Closed (UP), Open (DN)
DMX control and local addressing.
DMX channels 001 to 512 (S4, S3, S2).
Closed (UP), Closed (UP)
RDM control and remote addressing.
Rotary switch settings are ignored.
Note: Fixture will remember the last fixture address setting state after power is removed and re-applied.)
HID CONTROL INSTRUCTIONS FOR FIXTURES WITH SMART-HID™ IN-
STALLED
There are four different selectable modes of control. Switches are located under the moveable access door on the side of
the electronics box.
The single RED (S1) 2-position binary DIP switch sets each mode of control.
The three WHITE (S2, S3, S4) 10-position rotary decimal switches set the DMX address
Red DIP switch S1 (2,1) Mode (
Fixture hanging down from Track
) White Rotary switches S4, S3, S2 (left-right)
Open (DN), Closed (UP)
Full ON.
Rotary switch settings are ignored.
Closed (UP), Open (DN)
DMX control and local addressing.
DMX channels 001 to 512 (S4, S3, S2).
Closed (UP), Closed (UP)
RDM control and remote addressing.
Rotary switch settings are ignored.
Note: Fixture will remember the last fixture address setting state after power is removed and re-applied.)
SMART-HID™ DMX RELAY Control
DMX Console Level
Function
0 Relay OFF
1 thru 100
Relay ON
Altman Lighting 2 Circuit
Smart Track Fixture Settings
www.altmanlighting.com
21
