INSTALLATION INSTRUCTIONS / INSTRUCTIONS D’INSTALLATION
AFS-500 LED Follow Spot
10
Luminaire Care
CLEANING AND CARE
WARNING!
All cleaning should be performed with power completely removed from the luminaire. Never
remove protective covers when luminaire is powered. Wear appropriate protective eye wear and gloves
when cleaning the fixture. All service and maintenance, other than described herein, should be performed
by a qualified technician or Authorized Service Center. AT NO TIME SHOULD THE LED BE TOUCHED.
Special Cleaning and Care Instructions
Being a solid-state fixture, and unlike most fixtures, the
AFS-500 LED Follow spot
Luminaire requires
very
little routine maintenance by the user.
The
AFS-500 LED Follow spot Luminaire
requires special care when it comes to cleaning front lens
assembly. Additional care needs to be taken with the plastic components because they are much easier to
scratch or damage than glass.
The following is a list of cleaning materials required to care for your
AFS-500 LED Follow spot
:
• Lint free lens tissue
• Lint or powder free gloves
• Reagent grade isopropyl alcohol*
• A mild soap solution.
If the lens is still dirty after using isopropyl alcohol, for instance if fingerprints or oil is just redistributed and
not cleaned off the optic, then a mild soap and water solution can be used to gently wash the lens. Repeat
the cleaning with isopropyl alcohol to eliminate streaks and soap residue.
WARNING!
Under no circumstances should ammonia-based cleaners, acetone, or other harsh solvents
be used on or near the
AFS-500 LED Follow spot
Luminaire. These types of cleaners or solvents can
permanently damage the optics or housings of the fixture.
If you have any questions regarding the use or care of your
AFS-500 LED Follow spot
Luminaire,
please
contact Altman Lighting technical support or your local Authorized Dealer.
Front Lens Cleaning
To clean
each l
ens:
Step 1. Turn off luminaire and allow to cool completely.
Step 2. Remove the front Plastic cowling and slide the lower panel forward to allow lens cleaning access to
both sides of each lens.
Step
3
. Apply a small amount of reagent grade isopropyl alcohol to lint-free lens tissue.
Step
4
. Wipe all debris, dirt, fingerprints, etc. from lens.
Step
5
. Using a second lint-free lens tissue, wipe off any alcohol residue.
Filter
Cleaning
AS the AFS-500 is a fan cooled luminaire each of the fan filters will require routine cleaning to
ensure fixture longevity and reliability. Failure to carry out this routine maintainence will void the
fixtures warranty.
Using a Philips head screw driver remove the fan filter on the top of the unit. Clean via dry low velocity
compressed air from the underside of the filter.
