Single Plug-in Card Matrix Switcher
Altimium 14 www.altimium.com
Example: All input ports learn EDID data from output 04
+
+
+
4.1.3 Inquiry
Press and hold the button “ENTER” for 3 seconds to enter system inquiry mode. The
chart below shows information that can be inquired:
Function Items
Description
Example
Check customer
serial
Interface shown after entering
inquiry mode, customer serial
can be changed via RS232
command.
Check output
resolution
In inquiry mode, press output
channel to check its
resolution
Correspondence
between inputs
and outputs
“
OUTPUT
” + “
ENTER
”
4.1.4 Clear operation
Function: clear the previous operations before pressing
ENTER
to enforce it. Press
CLEAR
can only erase the operations not confirmed by pressing
ENTER
.
1)
Input/ output channels are recognized in double-digit, press 01~09 instead of 1~9.
2)
The input delay time between two numbers of every input& output channel must be
less than 8 seconds; otherwise the operation will be cancelled.
3)
The input/output channels on the rear panel are counting from left to right no matter
whether there is signal card.
