Single Plug-in Card Matrix Switcher
Altimium 15 www.altimium.com
4.2 IR Control
Connect an IR receiver to
IR EYE
on the rear panel, users can control the switcher with
the included IR remote (shown as below):
①
Standby: enter/ exit standby mode
②
INPUTS: input selection buttons, channels 1~9
should be pressed as 01~09
③
Function Buttons: share the same operation
with front panel buttons
④
ENTER:
confirm operation
long-press (3 seconds or more) to enter
inquiry mode
Note: navigation buttons are unavailable.
⑤
OUTPUTS: output selection buttons, channels
1~9 should be pressed as 01~09
