Altigen MAX Communication Server ACC 6.5, Руководство администратора

Страница: 99 / 488

Chapter 6: Voice Mail Configuration
MAXCS ACC 6.5 Administration Manual 85
Setting Message Management Options
Set voice mail message confirmation and warning parameters:
Setting Message Recording Options
Set voice mail message recording parameters:
Setting Exchange Integration Options
Set Exchange integration options. Access to these options requires an AltiGen Exchange
Integration License. To assign this license to an extension, see “Assign Exchange
Integration License” on page 210.
If you are opting to use Exchange 2007’s Speech Enabled Voice Mail features or Unified
Messaging, Exchange 2007 Server and AltiServ need to be installed on the same domain
with a network throughput rate of no less than 100 Mbps.
Parameter Description
Confirm Message
Deletion If checked, the system plays a voice message
instructing the user to confirm request for deletion
by pressing the # key. This prevents users from
accidentally deleting messages with a single key
entry.
Warn Expiration of
Saved Messages If checked, the system warns the user that saved
messages will be deleted due to their retention time
expiring. The message is given the day before the
messages are automatically deleted, and the user
then has the option to either keep or delete the
messages. By default, this feature is enabled.
Note:
If this feature is disabled, saved messages
are deleted automatically without warning
when they expire.
Parameter Description
Minimum Recording
Length Sets the minimum length in seconds for any
recording (incoming voice mail message, personal
greeting, system prompts, introductions to
forwarded voice mails). This can be from 1–5
seconds, or 0, which means no minimum.
All recordings that are shorter than the designated
Minimum Recording length are deleted. This feature
is recommended when users receive many short,
empty voice mail messages on a regular basis and
would like them automatically deleted.
Pause Detect Length Selected, this feature causes the deletion of pauses
in messages. The default pause detect length is
500
ms . The pause detect can be disabled by deselecting
the check box, or the length can be set to a value
between
200–2000 ms (.2–2 seconds) .