Altigen AltiWare ACC 5.1 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 383

Altigen AltiWare ACC 5.1 Скачать руководство пользователя страница 37

Chapter 2: Software Installation & License Registration

AltiWare ACC 5.1 Administration Manual 23

10. In the Setup Type dialog box, select the Upgrade from 5.0A option. Follow the

instructions on the screens.

Note:

If you plan to run Exchange Integration, make note of the system-assigned
password (or change the password to one you will remember). You will need
this password if you ever have to do troubleshooting in Exchange.

If you see the following dialog box, click the Continue Anyway button.

Note:

During installation, a Windows user account with local administrator rights is
created automatically to run Altiware services. Do not delete or modify this
account. You may change the password through installation. The account
name is in the form:

(

user name

: AltiGen_

<servername>

)

Note:

Your AltiWare Administrator password will be reset to default “22222” after
upgrade.

11. Complete the license registration process after software upgrade to activate your

licenses. The switching service may not function properly if the system upgrade
license is not registered. See “License Activation and Registration Procedures” on
page 24.

About License Keys and the System Key

Licenses must be registered with AltiGen for the system to function at full, licensed
capacity. This registration includes both AltiWare systems information, and registration
of dealer, installer, and end user (customer) data for each AltiGen system installed or
upgraded.
All software must be registered, including AltiWare Office products. No AltiGen software
comes out of the factory pre-registered. All license keys must be registered to the
system key — without proper registration, the system will function with only 8
extensions and all trunk ports enabled. If the system key is not present,
AltiAdmin cannot be connected to the server.

«
...
35
36
37
38
39
...
»

Содержание AltiWare ACC 5.1
































































































































































































































































































































































































Отзывы:

Нет отзывов