manualshive.com logo in svg

Altigen AltiWare ACC 5.1, Руководство администратора, Страница: 150 / 383

Поделиться
Скачать
Altigen AltiWare ACC 5.1 Скачать руководство пользователя страница 150

112

AltiWare ACC 5.1 Administration Manual

Triton Analog Trunk GS/LS Properties

To open a configuration dialog box for a Triton Analog Trunk GS/LS channel, do one of 
the following:

•

If you’re in the Trunk Configuration window, select a Triton Analog Trunk GS/LS 
channel from the trunk channels list, then click the Trunk Properties button, or just 
double-click the channel in the list.

•

If you’re in the Trunk View window, right-click the channel and select Channel 
Properties.

Figure 8. Triton Analog Trunk GS/LS Properties window 

Note that you can use Apply to in this dialog box to apply changes to other trunks of 
the same type.

Parameter

Description

Interface Type

Select the type of trunk that will interface with this trunk 
channel:

•

Loop Start Trunk

•

Ground Start Trunk

Содержание AltiWare ACC 5.1
































































































































































































































































































































































































Отзывы:

Нет отзывов