manualshive.com logo in svg

Altigen AltiWare ACC 5.1, Руководство администратора, Страница: 233 / 383

Поделиться
Скачать
Altigen AltiWare ACC 5.1 Скачать руководство пользователя страница 233

Chapter 17:  Mobile Extension Configuration

AltiWare ACC 5.1 Administration Manual 247

Voice Mail for Mobile Extensions

When the mobile extension phone is turned off or busy, messages can go to the 
extension’s voice mail in AltiWare or to the mobile phone’s voice mail:

•

To send a call to the mobile extension’s voice mail in AltiWare, check the Press any 
key to answer call check box.

•

To send a call to the mobile phone’s voice mail, the Press any key to answer call 
check box must be unchecked.

Mobile Extension Limitations

•

Quantum analog trunk is not supported.

•

Only PRI mobile trunks can deliver Caller ID information to the Mobile Extension.

•

A Mobile Extension cannot support Centrex transfer.

•

After adjusting the number of mobile extension ports in a mobile extension board, 
AltiWare must be restarted for the changes to take effect.

•

Cannot deliver caller name to the Mobile Extension.

•

Does not support Message Waiting Indicator on Mobile Extension device. (Use 
Message Notification as a work-around).

•

Since the DTMF key * is used for simulating the FLASH signal, there is no way to 
send * to the system. 

•

The RNA for Mobile Extension may not be accurate, because the system ring count 
may not be in sync with the Mobile Extension device ring count.

•

When placing calls to Mobile Extensions that are cell phones, if the cell phone is out 
of signal range, the caller may hear long periods of silence. You can check the Press 
any key to answer call option to prevent this problem.

•

Only analog trunks can be allocated as dedicated mobile trunks.

Содержание AltiWare ACC 5.1
































































































































































































































































































































































































Отзывы:

Нет отзывов