manualshive.com logo in svg

Altigen AltiWare ACC 5.1, Руководство администратора, Страница: 101 / 383

Поделиться
Скачать
Altigen AltiWare ACC 5.1 Скачать руководство пользователя страница 101

Chapter 9:  Voice Mail Configuration

AltiWare ACC 5.1 Administration Manual 165

Setting Message Management Options

Set voice mail message confirmation and warning parameters:

Setting Message Recording Options 

Set voice mail message recording parameters:

Setting E-mail Messaging Options 

To use the AltiWare e-mail services, configure the following settings.

Parameter

Description

Confirm Message 
Deletion

If checked, the system plays a voice message 
instructing the user to confirm request for deletion 
by pressing the # key. This prevents users from 
accidentally deleting messages with a single key 
entry.

Warn Expiration of 
Saved Messages

If checked, the system warns the user that saved 
messages will be deleted due to their retention time 
expiring. The message is given the day before the 
messages are automatically deleted, and the user 
then has the option to either keep or delete the 
messages. By default, this feature is enabled.

Note:

If this feature is disabled, saved messages 

are deleted automatically without warning 
when they expire.

Parameter

Description

Minimum Recording 
Length

Sets the minimum length in seconds for any 
recording (incoming voice mail message, personal 
greeting, system prompts, introductions to 
forwarded voice mails). This can be from 1–5 
seconds, or 0, which means no minimum.
All recordings that are shorter than the designated 
Minimum Recording length are deleted. This feature 
is recommended when users receive many short, 
empty voice mail messages on a regular basis and 
would like them automatically deleted. 

Pause Detect Length 

Selected, this feature causes the deletion of pauses 
in messages. The default pause detect length is 500 
ms. The pause detect can be disabled by deselecting 
the check box, or the length can be set to a value 
between 200–2000 ms (.2–2 seconds).

Parameter

Description

Enable SMTP/POP3 
E-Mail Service 

Selected, this enables incoming and outgoing mail 
services on AltiWare—Simple Mail Transfer Protocol 
(SMTP) and Post Office Protocol (POP). 

Содержание AltiWare ACC 5.1
































































































































































































































































































































































































Отзывы:

Нет отзывов