· If necessary, fill in/edit the required fields
· to save parameters, press the
Save
button, and the program will offer the
selected measurement scheme (see par.13.5.):
Designations:
-
order number of the car to be measured (number of cars in the
train);
-
number of the car to be measured;
-
editing of the input wheel parameters;
-
a previous/subsequent wheel;
-
a measured wheel;
-
a wheel to be measured next time;
-
a non-measured wheel;
-
a measured wheel to be measured again
-
measurement.
· Measure the wheel offered by the program (highlighted in green color), as it is
shown in par. 12.3.
After the measurement, the PDA will show the value of diameter. When a diameter falls
out of the specific tolerance, its value is indicated with red color.
Page 1 6/29
