· by activating lines containing the scheme file name it is possible to look at
available wheel processing schemes. Arrows in the figure show direction of
processing of wheel sets as well as the names assigned to wheels (1L-first
axis, left side; 2L-second axis, left side; 1R-first axis, right side, etc.);
· to set the selected scheme activate the respective line and press
Install
;
· to remove a scheme activate the respective line and press
Remove
.
13.5.2 Formation of a new measurement scheme
To form a new measurement scheme, press
Add
. The screen will show:
· by using on-screen keyboard type the scheme name;
· select the number of axles;
· select the number of coaches in the rolling stock (train);
· select the wheel processing scheme out of the options suggested press
Save
13.5.3 Loading of a new measurement scheme
If you can not form a new scheme in accordance with par. 13.5.2, it is possible to use a
special program for PC and then load the scheme to the PDA as it is shown in par. 15.
13.6. New electronic gauge connection
Bluetooth-connection of PDA is adjusted for work with the electronic gauge supplied
with PDA complete package. To connect other scanning module it is necessary to:
·
select IDK > New IDK
· press
Start
and wait for new devices (with serial numbers) will appear on the
screen
Keyboard
Page 2 1 /29
