Altera DE2 Board, Руководство по началу работы

Страница: 72 / 85

Lab 7: DE2 Control Panel
69
Figure 11.5. Random Access to the Flash Memory
5. You can also load a file into Flash by using Sequential Write function.
Please refer to Figure 11.6. You have to specify the starting address and the
length (in bytes) to be written into the Flash.
6. You can click on “File Length” checkbox to indicate that you want to load
entire file into the flash memory. Then Click on Write File to Flash to choose
the file to be loaded into the flash memory.
7. Please load c:\DE2\Binary_Raw_Data\cdda1m into your Flash Memory
now so that we can proceed with the Flash Music Player Lab in the next
section.
Figure 11.6. Write an entire file into the Flash Memory
8. Sequential Read function allows you to read the content in Flash and save
into a file. Figure 11.7 shows the screen capture of the Sequential Read.
You can also specify the starting address and the length (in bytes) to read
from the Flash. By clicking on the “Entire Flash” checkbox, you are
indicating that you would like to load entire flash content (1Mbyte) into a file
specified by you.
Figure 11.7. Load the content of the Flash Memory to a file