3.8.2 Printer Function
(Calibrate sensor, Ethernet setup, RTC setup………)
1. Select the PC interface connected with bar code printer.
2. Click the “Function” button to setting.
3. The detail functions in the Printer Function Group are listed as below.
Function
Description
Factory Default
Initialize the printer and restore the
settings to factory default.
Dump Text
To activate the printer dump mode.
Configuration
Page
Print printer configuration.
RTC Setup
Synchronize printer Real Time Clock
with PC.
Calibrate Sensor
Calibrate the sensor specified in the
Printer Setup group media sensor field.
Reset Printer
Reboot the printer.
Print Test Page
Print a test page.
Ignore AUTO.BAS
Ignore the downloaded AUTO.BAS
program.
Ethernet Setup
Setup the IP address, subnet mask,
gateway for the on board Ethernet.
Note:
For more information about Diagnostic Tool, please refer to the diagnostic utility
quick start guide in the CD disk \ Utilities directory.
22
