3.5 Peel-off Module Installation (Option)
1. Open the top cover and remove the front panel from the printer.
Front Panel
Fig. 12 Remove the front panel
2. Open the top cover and hold it and push down and push backward the top
cover support then push backward the top cover.
3. Use a screwdriver to screw off 6 screws on the lower inner cover.
Top Cover
Lower Cover
Screws
Lower Inner
Cover
Top Cover Support
Flute
Screws
Fig. 13 Remove 6 screws from lower inner cover
4. Upside down the printer. Remove two screws at the hinge and remove one
10
