Fig. 23 Remove 6 screws from lower inner cover
5. Place the printer upside down and unscrew the two screws of the
hinge
holder
on the lower cover.
6. Unscrew the screw of the memory card cover and remove the memory card
cover. Plug in the cutter driver IC at U14(TTP-245/343) / U30(TTP-245/343
Plus) socket on the main board.
7. Use both thumbs to hold the lower cover and index fingers to lift up the top
cover open levers to separate the lower inner cover and the lower cover.
8. Arrange the cable through the bezel. Connect the cutter module cable to
the 4-pin socket on printer PCB.
Cutter
Cutter Cable
4-pin Socket
PCB
Fig. 24 Cutter module installation
Lower Inner Cover
Cutter Cable
Lower Cover
Bezel
Fig. 25 Cutter module cable arrangement
16
