4
INPUT I/O
Configurations for input I/O
Signal
On / Off
Only flash
Signal On / Off
Flash and ringing beeps
low volume
Signal On / off
Flash and ringing beeps
strong volume
Input I/O used
as remote
separate for flash
The signal set ON or OFF of the alarm system triggers a series of short beeps and the flashing,
when the blocking voltage of 12V is switched to 0VDC. When the blocking voltage is back, the
SIREX generates a new series of beeps with longer flashings this time to distinguish the two
states.
For this function, SIREX can choose between two levels of audible beeps (S3.3) or even
deactivate the audible beeps (S3.4) and have only the flashing.
It is also possible to configure this input to order the flash separately.
Use a screwdriver to position the 4 interrupters of configuration of the siren.
TECHNICAL DATA
Direct voltage : From 9 to 15 VDC
Voltage on +12V CHR : From 12,0 to 14,5 VDC
Output voltage on +BAT : 13.8 VDC (+/-0.2 Vdc)
Residual ripple allowed : 250mV
Consumption in standby : 5 mA
Autonomy on internal battery : 72 hours
Length of alarm : OUT : 180 seconds / IND : 31 minutes
Consumption in alarm & sound power : OUT MAX : 1.6A 109 dB to 1m
OUT MIN : 0.8A 100 dB to 1m
IND MAX : 1.6A 113 dB to 1m
IND MIN : 0.8A 110 dB to 1m
Consumption in only alarm light: 20 mA (SIREX-F only)
Order voltage « SIR » and « I / O » : From 9 to 16 VDC (0,1mA)
Triggering voltage « SIR » and « I / O » : Below 3 VDC
Reset voltage « SIR » and « I / O » : More than 9 VDC
Degree of protection : IP 43 IK 08
Environment : Class IV – General outdoor
Operating temperature: -25°C to +70°C
Cable type for the connection : 3 pairs cable rigid : Ø >= 0,5mm
flexible : Ø >= 0,2mm
Type of backup batteries : 12V 2.1Ah
YUASA
NP2.1-12FR
12V 2.1Ah
YUCELL
Y2.1-12FR
12V 2.0Ah
POWERSONIC
PS 1220 V0
12V 2.2Ah
ELECKSON
BEL120022
12V 2.3Ah ACD ST20
12V 2.3Ah SUNLIGHT SP 12-2.1V0
Electromagnetic compatibility: in accordance with the norms NF EN 50130-4 and NF EN 55022
Electric security: in accordance with the norm EN 60950 ed. Oct. 2000
