5
INSTALLATION
SIREX is fixed on a vertical wall and flat surface
greater than that of its box, leaving at least 2cm
on each side. Drill the mounting holes according
to the drilling template, and then attach first the
plastic plug-shaped on the wall. Then place the
chassis of the Sirex taking care to place the
sensor monitoring breakout inside the plastic
cover. This system requires no adjustment.
It is imperative to test and verify the proper
functioning of the audible, visual and auto-
protection after the installation.
It is strongly recommended to check periodically
the proper tightening of connections and the
status of the backup battery and replace if
necessary.
1-
WALL
2-
TAMPER PLUG
3-
TAMPER SENSOR
4-
SCREW
5-
INSERT
6-
RUNNING CABLES
SAFETY INSTRUCTIONS
•
Avoid looking directly at the LEDs in operation.
•
During the tests, wear a hearing protective helmet or hold you at a
reasonable distance of the SIREX.
•
Do not perform any operation on SIREX in stormy weather.
•
Use only the type of the batteries indicated on the specifications
table
GARANTIE
ATLS provides a guarantee of 5 years from the date of the manufacture.
The year and month of manufacture appear on the label serial number placed
inside the device.
The warranty does not cover non-functional damage such as scratches, broken
by a fall or shock or degradation caused by abnormal use.
The guarantee applies only to cards and electronic assemblies and does not
cover damage caused by natural or artificial surges.
The guarantee applies only if the electronic part has not been dismantled, disturbed or transformed.
The warranty is strictly limited to repair or exchange parts that we found defective.
Return costs are still borne by the sender.
The detention of equipment under warranty won’t give rise to any compensation for any reason
whatsoever.
The responsibility of A.T.L.S. is limited to the repair of products and do not extend to the
consequences of their use, their implementation or their non-functioning.
