![background image](http://html.mh-extra.com/html/altec-lansing/imt800/imt800_user-manual_2909554016.webp)
14
NoTe
You can personalize the EQ presets by selecting a Preset EQ then
pressing the “EQ” button twice to enter the Bass/Treble Control Mode.
There you can make adjustments to the Preset EQs as described in the
Bass and Treble Control sections. Changes are saved automatically.
NoTe:
To reset the EQ Presets to factory settings, press and hold the EQ
button for a few seconds.
How to Adjust the 7-Band Graphic eQ Using the onboard controls
For even greater personalization of your music, you can dial in your sound
with the onboard 7-band graphic EQ.
1
enter the Graphic eQ Mode.
Press and hold the “EQ” button while you press the or buttons.
2
Select a frequency slider for adjustment.
Press the or buttons until the desired slider is highlighted.
3
Increase or decrease the level of the frequency slider.
Rotate the knob.
4
Select the next frequency slider for adjustment.
Press the or buttons until the next desired slider is highlighted.
5
Increase or decrease the level of the frequency slider.
Rotate the knob.
6
Continue selecting and adjusting frequency sliders as desired.
7
exit the Graphic eQ Mode.
Press the “EQ” button again. Or the unit will automatically exit this
mode after several seconds.
NoTe:
To reset the Graphic EQ to factory settings, press and hold the “EQ”
button for a few seconds.
How to Adjust the 7-Band Graphic eQ Using the clip-on remote
1
enter the Graphic eQ Mode.
On the speaker system, press and hold the “EQ” button while you
press the or buttons.
2
Select a frequency slider to adjust.
Press the or buttons on the clip-on remote until the desired slider
is highlighted.
3
Increase or decrease the level of the frequency slider.
Press the + or “–” buttons on the clip-on remote.
4
Select the next frequency slider to adjust.
Press the or buttons on the clip-on remote until the next desired
slider is highlighted.
5
Increase or decrease the level of the frequency slider.
Press the “+” or “–” buttons on the clip-on remote.
6
Continue selecting and adjusting frequency sliders as desired.
7
exit the Graphic eQ Mode.
Press the “EQ” button on either the clip-on remote or the speaker
system. Or the unit will automatically exit this mode after several
seconds.
NoTe:
To reset the Graphic EQ to factory settings, press and hold the “EQ”
button for a few seconds.
Setting eQ Controls