OUTPUT CONNECTION
The graphic equaliser output signal is carried out through two XLR-3-32 male connec-
tors, one per channel. The outputs are balanced, with a nominal impedance of 100
Ω
.
The following graphics shows some of the different possibilities of connection, relying
on the type of output signal, balanced or unbalanced and according to the ground configu-
ration of the equipment (floating or ground-referenced).
NOTE:
The equipment is considered floating, when the earth mains is lifted (is to say has a
mains plug of this form: ), or when it is lifted the electrical ground of the unit from the earth
mains (is to say, with the EARTH-LINK switch in OFF position:
).
UNBALANCED OUTPUT: This type of connection will be used when the sound destination unit
doesn't provide of balanced input. If it is possible, will be used the connection type 1.
1) Using twin-lead shielded cable:
2) Using single conductor coax cable:
10
ALTAiR
EQ-215/230 GRAPHIC ECUALISERS
GRAPHIC
EQUALISER
+
GRAPHIC
EQUALISER
+
Floating sound destination unit ( /
) : Close.
Ground-referenced sound destination unit ( /
) : Open.
Floating sound destination unit ( /
) : Close.
Ground-referenced sound destination unit ( /
) : Open.
SOUND
DESTINATION
UNIT
SOUND
DESTINATION
UNIT
Содержание EQ-215
Страница 18: ...18 ALTAiR EQ 215 230 GRAPHIC ECUALISERS...
