Altair EQ-215, Руководство пользователя

Страница: 7 / 21

Set up the voltage selector, placed at the graphic equaliser rear panel, in the desired
position.
Graphic equaliser set up 115 VAC.
Graphic equaliser set up 230 VAC.
Make sure that the fuse is the right one for the selected voltage:
T1A -------------------> 115 VAC.
T0,5A -------------------> 230 VAC.
CHANGING THE FUSE
The graphic equaliser unit is factory set up with a slow blow T0,5A FUSE, adequate to
work with a mains voltage between 220-240 VAC, 50-60 Hz.
Make sure that the graphic equaliser unit is disconnected from the mains.
The mains connector and fuse holder is paced at the graphic equaliser rear panel.
The fuse holder is a box located below this mains connector. Take out the fuse holder.
Upon extracting the fuse holder, the fuse will appear. Remove it and change for
a new one.
Insert the fuse holder into the mains connector again.
CAUTION:
Always make sure upon changing the fuse, that this is the adequate for the
selected mains voltage (T1A for 115 VAC and T0,5A for 230 VAC).
4
7
ALTAiR
EQ-215/230 GRAPHIC ECUALISERS
2
1
3
4
2
3